Cutters

Arc 127

Name: Arc 127
Brand: DTF Station

A 70 cm flatbed cutter that automates trimming for DTF and UV DTF transfers — sheet or roll, with one or two blades and cut paths straight from the RIP.

70 cm

Max media width

60 cm

Max cut width

100 cm/s

Cutting speed

0.5–3 mm

Cutting thickness

Find a dealer View equipment

Sold and supported through authorized DTF Station dealers — find yours for pricing, a live demo and installation.

Cutting, without the scissors.

Trimming is often the last manual job in a DTF line. The Arc 127 automates it for DTF and UV DTF prints.

Camera contour cutting

Camera position tracking reads registration marks and adjusts alignment in real time, so cuts follow the contour of each design.

Sheet or roll, one or two blades

Supports both sheet and roll modes and single- or dual-blade configurations, so the machine matches the material.

Auto feeding and vacuum hold-down

Automatic feeding keeps material moving, vacuum suction holds it steady, and a catch basket collects the waste after cutting.

Straight from the RIP

neoStampa integration sends cut paths from the same file that printed — no second file-preparation step.

Specifications

Max media width70 cm (27.5")

Max cut width60 cm (23.6")

Cutting speed100 cm/s (39.4"/s)

Max cutting force9.8 N

Cutting thickness0.5 to 3 mm with optional tools

ModesSheet and roll

BladesSingle or dual

SoftwareneoStampa RIP integration

Dimensions (W×D×H)132 × 203 × 102 cm

Weight220 kg

Power2,250 W · 220V · 11.4 A

Materials

DTF and UV DTF prints, TPU, PET and PVC film, photo paper, PP-backed media, cardboard, instant, magnetic and car stickers, and super-transparent and reflective film.

Installation

The Arc 127 runs on 220V and uses compressed air for its clamps, supplied by the included air compressor. Your dealer handles setup and operator training.

Downloads

Spec sheet